Ortho Stand™
There are no stock parts available for this product.
- Economical
- Enhanced anti-fatigue properties
- Available with black or yellow borders
- Overall thickness 13 mm (1/2")
There are no stock parts available for this product.
SKU | Short Description | Colour | Thickness | Dimensions | Stock Part | UOM |
---|---|---|---|---|---|---|
454.12x2x3BK | Ortho Stand | Black | 1/2" | 61 cm x 91 cm | No | EA |
454.12x2x3BYL | Ortho Stand | Black w/Yellow Borders | 1/2" | 61 cm x 91 cm | No | EA |
454.12x3x4BK | Ortho Stand | Black | 1/2" | 91 cm x 122 cm | No | EA |
454.12x3x4BYL | Ortho Stand | Black w/Yellow Borders | 1/2" | 91 cm x 122 cm | No | EA |
Suitable Environment | Dry, Wet |
Wearwell Categories | Anti-Fatigue Matting |
Customisation Level | Standard Sizes Only |
Solid or Drainage | Solid |
Compound | Grease Resistant Natural Rubber |
Recycled | >50% |
Warranty | 1 Year |
Property | Test / Result |
---|---|
Flammability | MVSS 302 / 'A'; Rating |
Taber Abrasion | Not Available |
Temperature Range | -12 to 49_ Celsius |
Coefficient of Friction | ASTM F1677 / Dry: COF = > .90 / Wet: COF = .36 |
Compression Deflection | Not Available |
Tear Strength | Not Available |
ESD Rating | Not Available |
Dielectric Strength | Not Available |
Key
Chemical | Urethane | Nitrile | PVC | CFR | SBR | Natural Rubber |
---|---|---|---|---|---|---|
Acetone | U | U | U | C | C | C |
Animal Fats | NT | A | C | U | U | U |
Bleach Solution (10% Dilute) | NT | B | B | C | C | C |
Boric Acid | B | A | A | A | A | A |
Brake Fluid | U | A | B | D | D | D |
Brake Fluid (Silicone Based) | U | A | B | A | B | B |
Chlorine Solution (3% Dilute) | C | A | B | C | C | C |
Citric Acid | NT | A | C | C | C | U |
Cutting Fluid (Mineral Oil Based) | U | B | B | B | C | D |
Diesel Oil | U | A | B | U | U | U |
Ethylene Acetate | NT | U | NT | U | U | U |
Ethylene Glycol | B | A | A | A | A | A |
Hydraulic Oil (Petroleum) | U | A | B | D | D | D |
Hydrochloric Acid Cole (37% Dilute) | U | C | C | B | B | B |
Isopropyl Alcohol | A | B | A | B | B | A |
Lacquer Solvents | U | U | U | U | U | U |
Lindol (Hydraulic Fluid) | NT | U | NT | U | U | U |
MEK | U | U | U | U | U | U |
Mineral Oil | C | A | B | A | B | U |
Naptha | NT | C | U | U | U | U |
Napthlene | U | U | U | U | U | U |
Petroleum | U | C | B | D | D | D |
Salt Water | A | A | B | B | B | C |
Tolulene | U | U | U | U | U | U |
Transmission Fluid (Type A) | U | B | A | C | U | U |
Trichloroethane | U | U | U | U | U | U |
Vegetable Oil | C | A | B | C | C | C |
A: GR stands for Grease Resistant.
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
A: The edging is built in! Ortho Stand matting comes with a molded-in safety bevel on all 4 sides and is available in black or yellow.
A: Yes, Ortho Stand mats can be placed in both wet and dry environments.
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
A: The top side of the mat is the side with the dome pattern.
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
A: Ortho Stand mats have a molded in safety bevel (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.