Tile-Top Select - Charbon de bois
- Surface antimicrobienne en PVC
- "Très bonne " base éponge
- Disponible en deux épaisseurs : 1/2 po (13 mm) et 7/8 po (22 mm)
Numéro de la pièce | La description | Couleur | Épaisseur | Dimensions | Partie courante | UOM |
---|---|---|---|---|---|---|
494.12x2x3CH | Tile-Top Select | Charcoal | 1/2" | 2' x 3' | Yes | EA |
494.12x2x60CH | Tile-Top Select | Charcoal | 1/2" | 2' x 60' | Yes | RL |
494.12x3x5CH | Tile-Top Select | Charcoal | 1/2" | 3' x 5' | Yes | EA |
494.12x3x60CH | Tile-Top Select | Charcoal | 1/2" | 3' x 60' | Yes | RL |
494.12x4x60CH | Tile-Top Select | Charcoal | 1/2" | 4' x 60' | Yes | RL |
494.78x2x3CH | Tile-Top Select UltraSoft | Charcoal | 7/8" | 2' x 3' | Yes | EA |
494.78x2x60CH | Tile-Top Select UltraSoft | Charcoal | 7/8" | 2' x 60' | Yes | RL |
494.78x3x5CH | Tile-Top Select UltraSoft | Charcoal | 7/8" | 3' x 5' | Yes | EA |
494.78x3x60CH | Tile-Top Select UltraSoft | Charcoal | 7/8" | 3' x 60' | Yes | RL |
494.78x4x60CH | Tile-Top Select UltraSoft | Charcoal | 7/8" | 4' x 60' | Yes | RL |
Environnement Convient | Sec |
la Catégorie | Anti-Fatigue Matting |
Personnalisation Niveau | C1 - Custom Length |
Drainage ou solide | Solid |
Composé | PVC Surface With PVC Sponge |
Recyclé | <10% |
Garantie | 3 Years |
Property | Test / Result |
---|---|
Inflammabilité | MVSS 302 / 'A'; Rating |
Taber Abrasion | Federal Standard 191 / 1000g, CS-17 wheel |
Température ambiante | 0 to 110 F |
Coefficienct de frottement | ASTM F1677 / Dry: COF = .79 |
Débattement de compression | ASTM D395-98 / 30% |
La force des larmes | Not Available |
Estimation d'ESD | Not Available |
Rigidité diélectrique | Not Available |
Légende
Agent chimique | Uréthanne | Nitrile | PVC | CFR | SBR | Caoutchouc naturel |
---|---|---|---|---|---|---|
Acétone | U | U | U | C | C | C |
Gras animal | NT | A | C | U | U | U |
Javel (diluée à 10 %) | NT | B | B | C | C | C |
Acide borique | B | A | A | A | A | A |
Liquide de freins | U | A | B | D | D | D |
Liquide de freins (avec silicone) | U | A | B | A | B | B |
Javel (diluée à 3 %) | C | A | B | C | C | C |
Acide citrique | NT | A | C | C | C | U |
Liquide de coupe (à base d'huile minérale) | U | B | B | B | C | D |
Carburant diesel | U | A | B | U | U | U |
Acétate d'éthylène | NT | U | NT | U | U | U |
Éthylène glycol | B | A | A | A | A | A |
Huile hydraulique (à base de pétrole) | U | A | B | D | D | D |
Acide chlorhydrique (dilué à 37 %) | U | C | C | B | B | B |
Alcool isopropylique | A | B | A | B | B | A |
Solvant laque | U | U | U | U | U | U |
Lindol (fluide hydraulique) | NT | U | NT | U | U | U |
MEK | U | U | U | U | U | U |
Huile minérale | C | A | B | A | B | U |
Naphtes | NT | C | U | U | U | U |
Naphtalène | U | U | U | U | U | U |
Pétrole | U | C | B | D | D | D |
Eau salée | A | A | B | B | B | C |
Toluène | U | U | U | U | U | U |
Huile à transmission (type A) | U | B | A | C | U | U |
Trichloroéthane | U | U | U | U | U | U |
Huile végétale | C | A |
A: Anti-fatigue mats are designed to offer a wide range of benefits to employees and employers. Anti-Fatigue floor mats can increase worker productivity, reduce slips, trips and falls and improve the overall health of your employees.
A: Standing long-term, especially on hard, unforgiving concrete leads to lower back pain, swelling of joints and poor circulation that can lead to varicose veins. Standing on anti-fatigue matting allows for continuous muscle movement which leads to increased blood flow to the legs, feet and back. Continuous blood circulation reduces fatigue, alleviates back pain and reduces swelling.
A: Fatigue eventually leads to lack of focus and concentration on the task at hand. Anti-fatigue mats reduce worker fatigue allowing them to remain focused on the job at hand.
A: The life expectancy of Wearwell Select Tile-Top™ mats will vary based on several factors: the number of shifts per day, the amount of foot traffic and the environment it is being used in. Under typical working conditions and customer buying history this product typically lasts about 2-3 years. You may experience different results depending on your specific application. We’d be happy to conduct a FREE Site Survey! to help you choose the product that best suits your specific needs.
A: Tile-Top mats were designed to be placed in dry work centers or work centers with minimal overspray. The sponge on the underside of your mat can absorb fluids it comes in contact with causing the mat to wear out prematurely.
A: Sweep regularly or dry-mop the surface. These mats can be wet-mopped with mild soap or detergent. For best results, use a detergent with a pH between 4 and 9.
A: We offer a variety of colors of Tile-Top matting. Our best-selling color is Black.
A: We do not recommend that you cut or modify your mat in any way. In fact, cutting the mat yourself will void the warranty. We offer our Tile-Top matting in 1ft cut lengths so you can order any length of matting that you need. We also customize matting if you require a unique shape or configuration.
A: The top side of the mat is the side with the marbled surface pattern. The Sponge side of the mat touches the floor.
A: Please allow the mat to acclimate to the environment for 24-48 hours. Once it has acclimated the edges will lay flat.
A: Yes we can. We offer 3 types of customization:
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
A: All of our Tile-Top mats are machined beveled (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.