WorkRite
- Conception légère facilitant les nettoyages fréquents
- Caoutchouc naturel
- Rebords de sécurité moulés
- Épaisseur totale : 1/2 po (13 mm)
Numéro de la pièce | La description | Couleur | Épaisseur | Dimensions | Partie courante | UOM |
---|---|---|---|---|---|---|
474.12x3x10BK | WorkRite | Black | 1/2" | 3' x 10' | Yes | EA |
474.12x3x20BK | WorkRite | Black | 1/2" | 3' x 20' | Yes | EA |
474.12x3x5BK | WorkRite | Black | 1/2" | 3' x 5' | Yes | EA |
Environnement Convient | Sec, Humide, Huileux, Glissant, Humide/ Sec |
la Catégorie | Tapis anti-fatigue |
Personnalisation Niveau | Dimensions normales seulement |
Drainage ou solide | Drainage |
Composé | Grease Resistant Natural Rubber |
Recyclé | >33% |
Garantie | 1 an |
Property | Test / Result |
---|---|
Inflammabilité | MVSS 302 / 'A' ; Classification |
Taber Abrasion | Non disponible |
Température ambiante | 10 to 110 F |
Coefficienct de frottement | ASTM F1677 / Sec : COF = 0,90 / Mouillé : COF = 0,34 |
Débattement de compression | Non disponible |
La force des larmes | Non disponible |
Estimation d'ESD | Non disponible |
Rigidité diélectrique | Non disponible |
Légende
Agent chimique | Uréthanne | Nitrile | PVC | CFR | SBR | Caoutchouc naturel |
---|---|---|---|---|---|---|
Acétone | U | U | U | C | C | C |
Gras animal | NT | A | C | U | U | U |
Javel (diluée à 10 %) | NT | B | B | C | C | C |
Acide borique | B | A | A | A | A | A |
Liquide de freins | U | A | B | D | D | D |
Liquide de freins (avec silicone) | U | A | B | A | B | B |
Javel (diluée à 3 %) | C | A | B | C | C | C |
Acide citrique | NT | A | C | C | C | U |
Liquide de coupe (à base d'huile minérale) | U | B | B | B | C | D |
Carburant diesel | U | A | B | U | U | U |
Acétate d'éthylène | NT | U | NT | U | U | U |
Éthylène glycol | B | A | A | A | A | A |
Huile hydraulique (à base de pétrole) | U | A | B | D | D | D |
Acide chlorhydrique (dilué à 37 %) | U | C | C | B | B | B |
Alcool isopropylique | A | B | A | B | B | A |
Solvant laque | U | U | U | U | U | U |
Lindol (fluide hydraulique) | NT | U | NT | U | U | U |
MEK | U | U | U | U | U | U |
Huile minérale | C | A | B | A | B | U |
Naphtes | NT | C | U | U | U | U |
Naphtalène | U | U | U | U | U | U |
Pétrole | U | C | B | D | D | D |
Eau salée | A | A | B | B | B | C |
Toluène | U | U | U | U | U | U |
Huile à transmission (type A) | U | B | A | C | U | U |
Trichloroéthane | U | U | U | U | U | U |
Huile végétale | C | A |
A: GR stands for Grease Resistant.
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
A: The edging is built in! WorkRite matting comes with a molded-in safety bevel on all 4 sides.
A: Yes, WorkRite is a rubber drainage mats designed for wet areas.
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
A: The ramps on the top side of the mat have ribs.
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
A: WorkRite mats have a molded in safety bevel (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.