H.T. Welding Runner

The H.T. Runner is the perfect solution for High Temperature and High Traffic areas where anti-fatigue isn’t the primary objective. H.T. Runner is the same dependable surface that’s used on Weldsafe No. 447 but as runner- only product. As a high temperature solution, the specially formulated rubber has an extraordinarily high melt point for demanding welding applications. As a high traffic solution the textured rubber surface assures solid footing and can be used for semi-permanent installations with common mastics. 

  • Melt point of over 500⁰ Fahrenheit (200⁰ Celsius) designed for welding
  • Install for aisle ways in facilities or transportation vehicles
  • Available 5 mm thick

+ Read More
Have a question? We're here to help!
Putting Together Wearwell Part Numbers
See an example of how Wearwell puts together their part numbers.

SKU Short Description Colour Thickness Dimensions Stock Part UOM
347.564x3x75BK H.T. Runner Black 3/16" 91 cm x 2286 cm Yes RL
347.564x4x75BK H.T. Runner Black 3/16" 121 cm x 2286 cm Yes RL
Parameters of Category: Specifications - General
Suitable EnvironmentDry
Wearwell CategoriesRunner
Customisation LevelC1- Custom Length
Solid or DrainageSolid
CompoundNatural Rubber Surface
Recycled>20%
Warranty1 Years
Test Specification & Results
PropertyTest / Result
Flammability MVSS 302 / 'A'; Rating.
Taber Abrasion Federal Standard 191 / 1% lost @ 1,000 cycles
Temperature Range 200 C Melt Point
Coefficient of Friction ASTM F1677 / Dry: COF = 1.10 / Wet COF = .32
Compression Deflection ASTM D575 / Deflection @ 35 psi, mm=7.85
Tear Strength Not Available
ESD Rating Not Available
Dielectric Strength Not Available

Key

  • A = Performs well
  • B = Slightly affected
  • C = Moderately affected
  • D = Highly affected
  • U = Not recommended
  • NT = Not tested
Chemical Urethane Nitrile PVC CFR SBR Natural Rubber
Acetone U U U C C C
Animal Fats NT A C U U U
Bleach Solution (10% Dilute) NT B B C C C
Boric Acid B A A A A A
Brake Fluid U A B D D D
Brake Fluid (Silicone Based) U A B A B B
Chlorine Solution (3% Dilute) C A B C C C
Citric Acid NT A C C C U
Cutting Fluid (Mineral Oil Based) U B B B C D
Diesel Oil U A B U U U
Ethylene Acetate NT U NT U U U
Ethylene Glycol B A A A A A
Hydraulic Oil (Petroleum) U A B D D D
Hydrochloric Acid Cole (37% Dilute) U C C B B B
Isopropyl Alcohol A B A B B A
Lacquer Solvents U U U U U U
Lindol (Hydraulic Fluid) NT U NT U U U
MEK U U U U U U
Mineral Oil C A B A B U
Naptha NT C U U U U
Napthlene U U U U U U
Petroleum U C B D D D
Salt Water A A B B B C
Tolulene U U U U U U
Transmission Fluid (Type A) U B A C U U
Trichloroethane U U U U U U
Vegetable Oil C A B C C C
Write Your Own Review
You're reviewing:H.T. Welding Runner
Your Rating

Q: Can I glue the 347 runner to the floor?

A:Yes, you can! Semi-permanent installations can be accomplished with common mastics. Please contact your local home improvement store for the best adhesive recommendation for rubber to whatever type of substrate you're adhering to. (i.e. concrete, wood, steel, etc.)


Q: If I purchase a full roll, will I be able to cut it to the lengths that I need?

A:Yes, you can! It's very easy to cut this material to size. All you need is a straight edge and a pair of shears or utility knife. Safety first! Always wear cut resistant gloves when cutting.


Q: What's the life expected life of this product?

A:The life expectancy can vary dramatically depending on a multitude of factors such as: foot traffic, exposure to oils, caustic chemicals or fluids, excessive temperatures, cleaning and maintenance schedule, compound, etc. The following are general guidelines based on our customers’ experience (your experience may vary): Average lifespan is 1 - 2 years.