Corrugated Switchboard Matting - Black with Yellow Borders

Designed to protect personnel in areas with dangerous high-voltage equipment, it can insulate against as much as 30,000 volts of electricity.

  • 1/4” thickness conforms to ANSI/ASTM D178-01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts)
  • Need a different size? 1’ incremental lengths are available! Simply give us a shout out!
  • + Read More
    Have a question? We're here to help!
    Putting Together Wearwell Part Numbers
    See an example of how Wearwell puts together their part numbers.

    SKU Short Description Colour Thickness Dimensions Stock Part UOM
    702.14x3x75BYL Corrugated Switchboard Matting Black w/Yellow Borders 1/4" 91 cm x 2286 cm Yes RL
    Parameters of Category: Specifications - General
    Suitable EnvironmentDry
    Wearwell CategoriesNon-Conductive
    Customisation Level-
    Solid or DrainageSolid
    CompoundPVC
    Recycled<10%
    Warranty1 Year
    Test Specification & Results
    PropertyTest / Result
    Flammability ASTM D178-01: 0.224 mm /s
    Taber Abrasion Fed. Std. 191: 1% lost @ 1,000 cycles
    Temperature Range Not Available
    Coefficient of Friction ASTM F1677: Dry COF .91
    Compression Deflection Not Available
    Tear Strength ASTM D412-98a Die C 1212 psi
    ESD Rating Not Applicable
    Dielectric Strength 1/4" thick: Surface conforms to ANSI/ASTM D178 01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts) 3/8" thick: Surface conforms to ANSI/ASTM D178 01, Type II, Class 3: 40,000 volts. (Recommended Max Usage up to 26,500 volts)

    Key

    • A = Performs well
    • B = Slightly affected
    • C = Moderately affected
    • D = Highly affected
    • U = Not recommended
    • NT = Not tested
    Chemical Urethane Nitrile PVC CFR SBR Natural Rubber
    Acetone U U U C C C
    Animal Fats NT A C U U U
    Bleach Solution (10% Dilute) NT B B C C C
    Boric Acid B A A A A A
    Brake Fluid U A B D D D
    Brake Fluid (Silicone Based) U A B A B B
    Chlorine Solution (3% Dilute) C A B C C C
    Citric Acid NT A C C C U
    Cutting Fluid (Mineral Oil Based) U B B B C D
    Diesel Oil U A B U U U
    Ethylene Acetate NT U NT U U U
    Ethylene Glycol B A A A A A
    Hydraulic Oil (Petroleum) U A B D D D
    Hydrochloric Acid Cole (37% Dilute) U C C B B B
    Isopropyl Alcohol A B A B B A
    Lacquer Solvents U U U U U U
    Lindol (Hydraulic Fluid) NT U NT U U U
    MEK U U U U U U
    Mineral Oil C A B A B U
    Naptha NT C U U U U
    Napthlene U U U U U U
    Petroleum U C B D D D
    Salt Water A A B B B C
    Tolulene U U U U U U
    Transmission Fluid (Type A) U B A C U U
    Trichloroethane U U U U U U
    Vegetable Oil C A B C C C
    Write Your Own Review
    You're reviewing:Corrugated Switchboard Matting - Black with Yellow Borders
    Your Rating

    Q: What is Switchboard matting?

    A: Also referred to as non-conductive matting, these products serve as an insulative barrier to protect personnel from dangerous and deadly shock. It's commonly used around high voltage areas, fuse boxes, switchgear, control panels and heavy machinery.


    Q: How often should switchboard matting be replaced?

    A: All switchboard matting should be inspected and/or replaced every year to ensure the safety of personnel.


    Q: Are the colors shown on your website the exact color I should expect to receive?

    A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.