Putting Together Wearwell Part Numbers
| Número de parte | Descripción | Color | Grosor | Dimensiones | Parte común | UOM |
| 557.78x18x18BK-CS10 | ErgoDeck ESD | Black | 7/8" | 18" x 18" | Yes | CS-10 |
Ramps and accessories
| Número de parte | Descripción | Color | Grosor | Dimensiones | Parte común | UOM |
| Ramp |
|---|
| 560.78x6x18BK-CS10 | Rampas ErgoDeck | Black | 7/8" | 6" x 18" | Yes | CS-10 |
| 561.78x6x18BK-CS10 | Rampas ErgoDeck para uso rudo con GRITSHIELD | Black | 7/8" | 6" x 18" | No | CS-10 |
| 560.78x6x36AL | Rampa de aluminio ErgoDeck | Aluminum | | 15cm x 91cm | Yes | EA |
| 560.78x6x18YL-CS10 | Rampas ErgoDeck | Yellow | 7/8" | 6" x 18" | Yes | CS-10 |
| Outside corner |
|---|
| 560.78x6x15x15YL-CS4 | ErgoDeck esquineros externos | Yellow | 7/8" | 6" x 15" x 15" | Yes | CS-4 |
| 561.78x6x15x15BK-CS4 | Rampas ErgoDeck para uso rudo con GRITSHIELD | Black | 7/8" | 6" x 15" x 15" | No | CS-4 |
| 560.78x6x15x15AL | ErgoDeck aluminio rampa esquina exterior | Aluminum | 7/8" | 15cm x 38cm x 38cm | Yes | EA |
| 560.78x6x15x15BK-CS4 | ErgoDeck esquineros externos | Black | 7/8" | 6" x 15" x 15" | Yes | CS-4 |
| Inside corner |
|---|
| 560.78x6x9x9BK | ErgoDeck esquinero interno | Black | 7/8" | 6" x 9" x 9" | Yes | EA |
| 560.78x6x9x9YL | ErgoDeck esquinero interno | Yellow | 7/8" | 6" x 9" x 9" | Yes | EA |
| 561.78x6x9x9BK | ErgoDeck Heavy Dutywith Grit Shield Inside Corner Black | Black | 7/8" | 6" x 9" x 9" | No | EA |
| 560.78x6x9x9AL | ErgoDeck aluminio rampa esquina exterior | Aluminum | 7/8" | 6" x 9" x 9" | Yes | EA |
Q: Do I need conductive or Static Dissipative flooring?
A: From a technical point of view, the answer is to confirm the OHM rating required by your application, then choose the product that meets your required OHM rating. Conductive products have a lower OHM rating. That means that there is less resistance and therefore, conductive products will allow static electricity to ground out faster than a static dissipative product, which has a higher OHM rating, and therefore higher resistance.
Q: What does the OHM rating tell me?
A: An OHM is a unit of measure that defines electrical resistance between two points. The lower the OHM reading the lower the resistance to electricity passing through and therefore the faster electricity can pass through to ground. There is a specific range of OHM ratings that define the difference between a conductive product and a static dissipative product. Choose the product which has an OHM rating that meets the requirements of your application.
Q: What is ESD?
A: ESD (Electrostatic discharge) is the sudden flow of electricity between two electrically charged objects caused by contact. ESD is the cause for that annoying "zap" you get when you reach for a metal door handle. Your body and clothing accumulate static electricity. That static electricity desperately wants to reach a ground point. ESD matting and flooring is intended to prevent unintentional discharges of static electricity by creating a path to ground through your body and out through the mat or floor for static electricity that is accumulated in your body and clothing.
Q: Do I still need heel grounding straps?
A: To allow the flow of electricity to reach a ground source, a heel strap must be worn if the operator is wearing non-conductive soled shoes.
Q: Are the colors shown on your website the exact color I should expect to receive?
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
