For more information on the 24/Seven® LockSafe® Interlocking Rubber Flooring System or (NEW!) LockSafe MAX, click here.
24/Seven LockSafe Solid ESD - Interlocking Floor Tiles 3' x 3'
SKU | Short Description | Color | Thickness | Dimensions | Stock Part | UOM |
---|---|---|---|---|---|---|
770.58x3x3GRBK | 24/Seven® LockSafe® ESD, Solid | Black | 3' x 3' | Yes | EA |
Ramps and accessories
SKU | Short Description | Color | Thickness | Dimensions | Stock Part | UOM |
---|---|---|---|---|---|---|
Female edging | ||||||
578.EdgingFGRBK | 24/Seven® LockSafe® Female Edging GR | Black | 5/8" | 3" x 36" | Yes | EA |
578.EdgingFGRYL | 24/Seven® LockSafe® Female Edging GR, 5/8" x 3" x 36", Yellow | Yellow | 5/8" | 3" x 36" | Yes | EA |
Male edging | ||||||
578.EdgingMGRBK | 24/Seven® LockSafe® Male Edging GR, 5/8" x 3" x 36", Black | Black | 5/8" | 3" x 36" | Yes | EA |
578.EdgingMGRYL | 24/Seven® LockSafe® Male Edging GR, 5/8" x 3" x 36", Yellow | Yellow | 5/8" | 3" x 36" | Yes | EA |
Outside corner | ||||||
578.CornerGRYL-CS4 | 24/Seven® LockSafe® Corner Ramp GR, 5/8" x 3" x 3", Yellow | Yellow | 5/8" | 3" x 3" | Yes | EA |
578.CornerGRBK-CS4 | 24/Seven® LockSafe® Corner Ramp GR, 3" x 3". Black | Black | 5/8" | 3" x 3" | Yes | EA |
Parameters of Category: Specifications - General
Suitable Environment | Dry, Wet, Slippery |
Type | Anti-Fatigue Flooring |
Customization Level | C3 - Full Custom (Length, Width, Shape) |
Solid or Drainage | Solid |
Compound | Grease Resistant Natural Rubber (GR) |
Recycled | >50% |
Warranty | 1 Year |
Test Specification & Results
Property | Test / Result |
---|---|
Flammability | MVSS 302 / 'A'; Rating |
Taber Abrasion | Federal Standard 191 / 1% lost @ 1,000 cycles |
Temperature Range | 10 to 140 F |
Coefficient of Friction | ASTM F1677 / Dry: COF = .90 / Wet COF = 020 |
Compression Deflection | Not Available |
Tear Strength | Not Available |
ESD Rating | EOS/ESD S7.1: 1x10^6-1x10^9 (meets ANSI/ESD 20.20 requirements) |
Dielectric Strength | Not Available |
Key
- A = Performs well
- B = Slightly affected
- C = Moderately affected
- D = Highly affected
- U = Not recommended
- NT = Not tested
Chemical | Urethane | Nitrile | PVC | CFR | SBR | Natural Rubber |
---|---|---|---|---|---|---|
Acetone | U | U | U | C | C | C |
Animal Fats | NT | A | C | U | U | U |
Bleach Solution (10% Dilute) | NT | B | B | C | C | C |
Boric Acid | B | A | A | A | A | A |
Brake Fluid | U | A | B | D | D | D |
Brake Fluid (Silicone Based) | U | A | B | A | B | B |
Chlorine Solution (3% Dilute) | C | A | B | C | C | C |
Citric Acid | NT | A | C | C | C | U |
Cutting Fluid (Mineral Oil Based) | U | B | B | B | C | D |
Diesel Oil | U | A | B | U | U | U |
Ethylene Acetate | NT | U | NT | U | U | U |
Ethylene Glycol | B | A | A | A | A | A |
Hydraulic Oil (Petroleum) | U | A | B | D | D | D |
Hydrochloric Acid Cole (37% Dilute) | U | C | C | B | B | B |
Isopropyl Alcohol | A | B | A | B | B | A |
Lacquer Solvents | U | U | U | U | U | U |
Lindol (Hydraulic Fluid) | NT | U | NT | U | U | U |
MEK | U | U | U | U | U | U |
Mineral Oil | C | A | B | A | B | U |
Naptha | NT | C | U | U | U | U |
Napthlene | U | U | U | U | U | U |
Petroleum | U | C | B | D | D | D |
Salt Water | A | A | B | B | B | C |
Tolulene | U | U | U | U | U | U |
Transmission Fluid (Type A) | U | B | A | C | U | U |
Trichloroethane | U | U | U | U | U | U |
Vegetable Oil | C | A | B | C | C | C |
Q: What is an NFSI Certification?
A: These products have been tested by the National Floor Safety Institute per the NFSI 101-C Test Method and have passed the NFSI “High-Traction” standard.
Q: Do I need conductive or Static Dissipative flooring?
A: From a technical point of view, the answer is to confirm the OHM rating required by your application, then choose the product that meets your required OHM rating. Conductive products have a lower OHM rating. That means that there is less resistance and therefore, conductive products will allow static electricity to ground out faster than a static dissipative product, which has a higher OHM rating, and therefore higher resistance.
Q: What does the OHM rating tell me?
A: An OHM is a unit of measure that defines electrical resistance between two points. The lower the OHM reading the lower the resistance to electricity passing through and therefore the faster electricity can pass through to ground. There is a specific range of OHM ratings that define the difference between a conductive product and a static dissipative product. Choose the product which has an OHM rating that meets the requirements of your application.
Q: What is ESD?
A: ESD (Electrostatic discharge) is the sudden flow of electricity between two electrically charged objects caused by contact. ESD is the cause for that annoying "zap" you get when you reach for a metal door handle. Your body and clothing accumulate static electricity. That static electricity desperately wants to reach a ground point. ESD matting and flooring is intended to prevent unintentional discharges of static electricity by creating a path to ground through your body and out through the mat or floor for static electricity that is accumulated in your body and clothing.
Q: Do I still need heel grounding straps?
A: To allow the flow of electricity to reach a ground source, a heel strap must be worn if the operator is wearing non-conductive soled shoes.
Q: What does GR stand for?
A: GR stands for Grease Resistant.
Q: What types of fluids is the GR compound resistant to?
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
Q: Is there edging available?
A: Yes, 3" edging is available in both yellow and black for 24/Seven LockSafe. Edging comes in both male and female to correspond with the male or female side of the mat. Edging comes in 3" wide by 36" long strips.
Q: How do I clean 24/Seven LockSafe?
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
Q: Can you customize a mat to my specific requirements?
A: Yes we can. We offer 3 types of customization:
The level of customization by product is on the details tab at the bottom of every product page.
Q: Are the colors shown on your website the exact color I should expect to receive?
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
Q: Do 24/Seven LockSafe mats pose a tripping hazard?
A: 24/Seven LockSafe mats are available with 3" edging in yellow and black. The ramps allow for a smooth transition on and off the mat. The mats lock together with a patented interlock so they do not come apart, preventing the possiblity of a tripping hazard.