| Número de parte | Descripción | Color | Grosor | Dimensiones | Parte común | UOM |
|---|---|---|---|---|---|---|
| 454.12x2x3BK | Ortho Stand | Black | 1/2" | 2' x 3' | Yes | EA |
| 454.12x2x3BYL | Ortho Stand | Black w/Yellow Borders | 1/2" | 2' x 3' | Yes | EA |
| 454.12x3x4BK | Ortho Stand | Black | 1/2" | 3' x 4' | Yes | EA |
| 454.12x3x4BYL | Ortho Stand | Black w/Yellow Borders | 1/2" | 3' x 4' | Yes | EA |
| Medio Ambiente adecuado | Seco, Húmedo |
| Tipo | Tapete antifatiga |
| Nivel de personalización | Solo en tamaños estándar |
| Drenaje o Sólidos | Patrón Sólido |
| Compuesto | Hule natural resistente a la grasa |
| Reciclado | >50% |
| Garantía | 1 año |
| Property | Test / Result |
|---|---|
| Inflamabilidad | MVSS 302/Clasificación "A" |
| abrasión Taber | No disponible |
| Rango de temperatura | De 10 a 120 °F |
| Coeficiente de Fricción | ASTM F1677/Seco: COF = >0.90/Húmedo: COF = 0.36 |
| compresión de Deflexión | No disponible |
| resistencia al desgarro | No disponible |
| Valoración esd | No disponible |
| resistencia dieléctrica | No disponible |
A: GR stands for Grease Resistant.
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
A: The edging is built in! Ortho Stand matting comes with a molded-in safety bevel on all 4 sides and is available in black or yellow.
A: Yes, Ortho Stand mats can be placed in both wet and dry environments.
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
A: The top side of the mat is the side with the dome pattern.
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
A: Ortho Stand mats have a molded in safety bevel (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.
