| SKU | Short Description | Color | Thickness | Dimensions | Stock Part | UOM |
|---|---|---|---|---|---|---|
| 454.12x2x3BK | Ortho Stand | Black | 1/2" | 2' x 3' | Yes | EA |
| 454.12x2x3BYL | Ortho Stand | Black w/Yellow Borders | 1/2" | 2' x 3' | Yes | EA |
| 454.12x3x4BK | Ortho Stand | Black | 1/2" | 3' x 4' | Yes | EA |
| 454.12x3x4BYL | Ortho Stand | Black w/Yellow Borders | 1/2" | 3' x 4' | Yes | EA |
Parameters of Category: Specifications - General
| Suitable Environment | Dry, Wet |
| Type | Anti-Fatigue Matting |
| Customization Level | Standard Sizes Only |
| Solid or Drainage | Solid |
| Compound | Grease Resistant Natural Rubber |
| Recycled | >50% |
| Warranty | 1 Year |
Test Specification & Results
| Property | Test / Result |
|---|---|
| Flammability | MVSS 302 / 'A'; Rating |
| Taber Abrasion | Not Available |
| Temperature Range | 10 to 120 F |
| Coefficient of Friction | ASTM F1677 / Dry: COF = > .90 / Wet: COF = .36 |
| Compression Deflection | Not Available |
| Tear Strength | Not Available |
| ESD Rating | Not Available |
| Dielectric Strength | Not Available |
Key
- A = Performs well
- B = Slightly affected
- C = Moderately affected
- D = Highly affected
- U = Not recommended
- NT = Not tested
| Chemical | Urethane | Nitrile | PVC | CFR | SBR | Natural Rubber |
|---|---|---|---|---|---|---|
| Acetone | U | U | U | C | C | C |
| Animal Fats | NT | A | C | U | U | U |
| Bleach Solution (10% Dilute) | NT | B | B | C | C | C |
| Boric Acid | B | A | A | A | A | A |
| Brake Fluid | U | A | B | D | D | D |
| Brake Fluid (Silicone Based) | U | A | B | A | B | B |
| Chlorine Solution (3% Dilute) | C | A | B | C | C | C |
| Citric Acid | NT | A | C | C | C | U |
| Cutting Fluid (Mineral Oil Based) | U | B | B | B | C | D |
| Diesel Oil | U | A | B | U | U | U |
| Ethylene Acetate | NT | U | NT | U | U | U |
| Ethylene Glycol | B | A | A | A | A | A |
| Hydraulic Oil (Petroleum) | U | A | B | D | D | D |
| Hydrochloric Acid Cole (37% Dilute) | U | C | C | B | B | B |
| Isopropyl Alcohol | A | B | A | B | B | A |
| Lacquer Solvents | U | U | U | U | U | U |
| Lindol (Hydraulic Fluid) | NT | U | NT | U | U | U |
| MEK | U | U | U | U | U | U |
| Mineral Oil | C | A | B | A | B | U |
| Naptha | NT | C | U | U | U | U |
| Napthlene | U | U | U | U | U | U |
| Petroleum | U | C | B | D | D | D |
| Salt Water | A | A | B | B | B | C |
| Tolulene | U | U | U | U | U | U |
| Transmission Fluid (Type A) | U | B | A | C | U | U |
| Trichloroethane | U | U | U | U | U | U |
| Vegetable Oil | C | A | B | C | C | C |
Q: What does GR stand for?
A: GR stands for Grease Resistant.
Q: What types of fluids is the GR compound suited for?
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
Q: Is there edging available?
A: The edging is built in! Ortho Stand matting comes with a molded-in safety bevel on all 4 sides and is available in black or yellow.
Q: Can Ortho Stand mats be exposed to liquids?
A: Yes, Ortho Stand mats can be placed in both wet and dry environments.
Q: How do I clean my Ortho Stand mat?
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
Q: There 2 sides to my mat. Which side do I stand on?
A: The top side of the mat is the side with the dome pattern.
Q: Are the colors shown on your website the exact color I should expect to receive?
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
Q: Do Ortho Stand mats pose a tripping hazard?
A: Ortho Stand mats have a molded in safety bevel (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
Q: Do your rubber mats smell?
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.
