24/Seven WorkStation NBR
- Disponible en dos compuestos de hule diferentes según las exposiciones medioambientales:
- GR: materiales secos o húmedos
- NBR: líquidos a base de petróleo
Número de parte | Descripción | Color | Grosor | Dimensiones | Parte común | UOM |
---|---|---|---|---|---|---|
588.58x2x3NBRBYL | Las alfombrillas 24/Seven Workstation están diseñadas para la seguridad, con bordes de seguridad brillantes y una superficie texturizada para la tracción. | Black w/ Yellow Borders | 5/8" | 2' x 3' | Yes | EA |
588.58x3x4NBRBYL | Las alfombrillas 24/Seven Workstation están diseñadas para la seguridad, con bordes de seguridad brillantes y una superficie texturizada para la tracción. | Black w/ Yellow Borders | 5/8" | 3' x 4' | Yes | EA |
588.58x3x5NBRBYL | Las alfombrillas 24/Seven Workstation están diseñadas para la seguridad, con bordes de seguridad brillantes y una superficie texturizada para la tracción. | Black w/ Yellow Borders | 5/8" | 3' x 5' | Yes | EA |
Medio Ambiente adecuado | Seco, Húmedo, Aceitoso, Resbaladizo |
Tipo | Tapete antifatiga |
Nivel de personalización | Personalizado 1, tamaños estándar |
Drenaje o Sólidos | Patrón Abierto |
Compuesto | Hule de nitrilo (NBR) |
Reciclado | |
Garantía | 1 año |
Property | Test / Result |
---|---|
Inflamabilidad | MVSS 302/Clasificación "A" |
abrasión Taber | Norma federal 191 modificada/Pérdida del 1 % |
Rango de temperatura | De 10 a 140 °F |
Coeficiente de Fricción | ASTM F1677/Seco: COF = 0.78/COF húmedo = 0.68 |
compresión de Deflexión | No disponible |
resistencia al desgarro | No disponible |
Valoración esd | No disponible |
resistencia dieléctrica | No disponible |
A: NBR stands NBR stands for Nitrile Rubber.
A: The NBR compound is resistant to silicone-based brake fluid, boric acid, ethylene glycol, animal fats, brake fluid, chlorine solution, diesel oil, petroleum-based hydraulic oil, salt water and vegetable oil.
A: GR stands for Grease Resistant.
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
A: Yes. All Industrial Worksafe Mats include a molded-in safety border. The GR compound is available with black or orange borders. The NBR compound is available with black, yellow or orange borders.
A: Yes, Industrial Worksafe can be placed in both wet and dry environments.
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
A: The ramps on the top side of the mat are ribbed.
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
A: 24/Seven WorkStation mats have molded-in safety borders (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.